Momentum TDT® Arrows & Shafts 6-Pack

$119.99

Tapered Carbon hunting arrows           

 

ARROW ORDERING CHEAT SHEEt

 

Questions? We're happy to help!

call tech support: 888-697-9828 (ext 2)

 

In stock

Maximum 150 characters

The Best Bowhunting Arrow in the World

Tapered - Built In 5% FOC

Unmatched Structural Integrity

 


GrizzlyStik Momentum TDT - Thin Diameter Tapered carbon arrows with built-in FOC (Forward of Center) strength, accuracy, penetration, and trajectory. GrizzlyStik Momentum TDT tapered arrows - We teamed up with Victory Archery with one goal - to make the most advanced bowhunting arrow in the world.

 

We offer arrow spines in 170, 240, 320, and 400 for bows from 40# - 100# + (Depending on point slug weight and arrow length.)

 

These arrows had to incorporate all of our (GrizzlyStik's) required elements to make the most advanced hunting arrow in the world.

  • Built using Mitsubishi 3K Woven Carbon - For unsurpassed structural integrity
  • A continuous .001"/inch taper from tip to tail - For built-in FOC, Weight forward, Strength forward, and Spine Forward benefits
  • Tapered externally and parallel internally - Allows spine control & tuning by cutting from point or nock end
  • Thin diameter - thick-walled, built on the .204" platform - For increased penetration performance and universal component compatibility
  • As light as possible - for total arrow weight versatility & control, and to optimize FOC


 

Nothing is unbreakable......but with GrizzlyStik Momentum TDT arrows - Good Luck! There's a good chance you'll lose these arrows before you break them. Dr. Ashby listed structural integrity as number 1 on his top 12 list for arrow penetration and GrizzlyStik follows the rules.   

All our GrizzlyStik Momentum TDT arrows come with:

  • Patient protected, Victory built in-outsert - To shore up the front of the arrow for hard bone-splitting hits
  • Precise manufacturing tolerances from Mitsubishi - Making tuning, accuracy, consistency, and bow setup a breeze
  • Victory slick ICE coating - For better penetration on big game, and to minimize sticking in targets
  • The highest FOC (Forward Of Center) Potential of any other carbon arrow - Approx. 5% FOC even with no nock or insert!

 


Click Here For our Momentum TDT Arrow Weights & FOC Chart


 

 


 

 

 


 

Introducing the new GrizzlyStik Momentum TDT arrows by Victory Archery - Thin Diameter Tapered carbon arrows!

Our best arrows ever!

Thin diameter - thick walled - full length tapered arrows: The ultimate in; strength, accuracy, penetration, and trajectory.

The Momentum TDT 170 is for heavy bows. Normally 80# up to 100#+ but can sometimes be tuned to 70# bows.

Heavy bows shooting thin diameter heavy arrows with the right broadheads on board are big medicine for successfully bowhunting the largest animals in the world. Whether Elephant, Hippo, Cape Buffalo, Asiatic Buffalo, Giraffe or Brown Bear - The GrizzlyStik Momentum TDT 175 can do it all. Think of it as the .500 Nitro Express of Bowhunting equipment ~ without the recoil.

 


 

We teamed up with Victory Archery with one goal - to make the best arrows for bowhunting we possibly could.

 

These arrows had to incorporate all of our (GrizzlyStik's) required elements as well as those suggested by Victory Archery.

Super Strong Woven Carbon - For unsurpassed structural integrity

A continuous .001"/inch taper from tip to tail - For built in FOC, Weight forward, Strength forward, and Spine Forward benefits

Tapered externally and parallel internally - Allows spine control & tuning by cutting from point or nock end

Thin diameter - thick walled, built on the .204" platform - For increased penetration performance and universal component compatibility

As light as possible - for total arrow weight versatility & control, and to optimize FOC

Include a tough in-outsert - To shore up the front of the arrow for hard bone-splitting hits

Built to precise tolerances - Making tuning, accuracy, consistency, and bow set-up a breeze

Include the Victory slick ICE coating - For better penetration on big game, and to minimize sticking in targets

Provide the highest FOC (Forward Of Center) Potential of any other arrow - Approx. 5% FOC even with no nock or insert!


 

 


 

With the GrizzlyStik Momentum TDT thin diameter tapered arrows, you get a broadhead delivery system with built in FOC (Forward of Center) balance points of at least 20%, when loaded up with a 200 grain broadhead.

If weighted up to 650 grains with our internal weight system, these arrows become the flattest shooting arrows that still have the ability to split bone when encountered (when using GrizzlyStik single bevel broadheads) and give amazing penetration under all situations

Bowhunters now can truly have ONE ARROW that can provide lethal penetration - Pass Throughs and Bone Breaks - On all big game animals in North America and all African plains game animals up to and including Eland.

Settle on your set-up. Tune your bow to the GrizzlyStik System - and have one arrow for every big game animal in North America!

Beware the man with one arrow set-up for he very well may know what he is doing!

With the new Victory Momentum TDT thin diameter tapered arrows - you can do it!



 

Note: You don't HAVE to shoot a 200 grain broadhead. Some bowhunters shoot much lighter broadheads. If this is you - you STILL need to look at the Momentum TDT arrows, they will give you MUCH better penetration than your current arrows - even when you use non-GrizzlyStik broadheads.

If you take your bowhunting seriously - test the Momentum TDT arrows yourself - They give you more strength forward, weight forward, and spine forward. The fly more accurately at longer ranges, they group more consistently at longer ranges, and they are WAY less susceptible to wind drift!

Whether you shoot our broadheads or some other brand - With GrizzlyStik Momentum TDT arrows behind your broadheads your set-up will penetrate better than ever before!

The new GrizzlyStik Momentum TDT full length tapered carbon arrows from Victory Archery are a game changer - you owe it to yourself to try them and see the difference.

 


 

 


 






Momentum TDT arrows offer the optimum ratio of mass weight to stiffness for arrows that live to zip through anything that gets in their way. In short, no matter how fast your compound, (or traditional bow for that matter) if you re looking for the ultimate, one arrow that does it all , fill your quiver with Momentum TDT tapered carbons and hunt with confidence, knowing that you re shooting the best there is.

GrizzlyStik Momentum TDT's come standard with Bohning A-nocks, and the new factory bonded aluminum and brass jacketed outer sleeve insert system.

 

Note: All current stock GrizzlyStik Single Bevel broadheads are Right bevel heads.

 




Maximize penetration! For amazing pass-through power like you ve never seen before, shoot hard-hitting GrizzlyStik Momentum TDT arrows by Victory Archery.

The most advanced full length tapered carbon arrows ever offered. Cutting edge micro-carbon technology combined with the industry s only tip-to-tail-taper yields an incredibly strong, aerodynamically superior, broadhead delivery system.

The proof is in the shooting, (and the science that backs it up) with GrizzlyStik Momentum TDT arrows you get all the penetration advantages of; weight forward, strength forward, and spine forward; including built-in Ultra-Forward of Center potential.

 

More Information
Brand GrizzlyStik
Design Tapered
Total Arrow Weight Stock, 575 Grains, 650 Grains, 800 Grains, 950 Grains, 1250 Grains
Write Your Own Review
You're reviewing:Momentum TDT® Arrows & Shafts 6-Pack

We teamed up with Victory Archery with one goal - to make the best arrows for bowhunting we possibly could. These arrows had to incorporate all of our (GrizzlyStik's) required elements and those suggested by Victory Archery.

• Super Strong Woven Carbon - For unsurpassed structural integrity

• A continuous .001"/inch taper from tip to tail - For built-in FOC, Weight forward, Strength forward, and Spine Forward benefits

• Tapered externally and parallel internally - Allows spine control & tuning by cutting from point or nock end

• Thin diameter - thick-walled, built on the .204" platform - For increased penetration performance and universal component compatibility

• As light as possible - for total arrow weight versatility & control, and to optimize FOC

• Include a tough in-outsert - To shore up the front of the arrow for hard bone-splitting hits

• Built to precise tolerances - Making tuning, accuracy, consistency, and bow set-up a breeze

• Include the Victory slick ICE coating - For better penetration on big game, and to minimize sticking in targets

• Provide the highest FOC (Forward Of Center) Potential of any other arrow - Approx. 5% FOC even with no nock or insert!

 

Momentum TDT 170 Specifications:

• Static Spine: .170"

• Straightness Tolerance:+/- .003" (G3) & +/- .006" (G6)

• Weight Tolerance - 6-pack: +/- 1 grain

• Weight: Full-length bare shaft ~ 466 grains

• Profile: Continuous .001"/inch taper

• Internal Diameter: .204"

• External Diameter Point End @ 30.5": .312"

• External Diameter Nock End @ .5": .280"

• External Diameter Insert Tip: .368" 

• Material: Mitsubishi 3K Woven Micro-Carbon 

• Insert Weight: Approx. 70 grains

• Nock Weight: Approx. 7 grains

 

Momentum TDT 240 Specifications:

• Static Spine: .240"

• Straightness Tolerance: +/- .003" (G3) & +/- .006" (G6)

• Weight Tolerance - 6-pack: +/- 1 grain

• Weight: Full-length bare shaft ~ 366 grains

• Profile: Continuous .001"/inch taper

• Internal Diameter: .204"

• External Diameter Point End @ 30.5": .293"

• External Diameter Nock End @ .5": .262"

• External Diameter Insert Tip: .347" 

• Material: Mitsubishi 3K Woven Micro-Carbon             

• Insert Weight: Approx. 70 grains

• Nock Weight: Approx. 7 grains

Momentum TDT 320 Specifications:

• Static Spine: .320"

• Straightness Tolerance:+/- .003" (G3) & +/- .006" (G6)

• Weight Tolerance - 6-pack: +/- 1 grain

• Weight: Full-length bare shaft ~ 333 grains

• Profile: Continuous .001"/inch taper

• Internal Diameter: .204"

• External Diameter Point End @ 30.5": .288"

• External Diameter Nock End @ .5": .256"

• External Diameter Insert Tip: .343" 

• Material: Mitsubishi 3K Woven Micro-Carbon 

• Insert Weight: Approx. 70 grains

• Nock Weight: Approx. 7 grains

Momentum TDT 400 Specifications:

• Static Spine: .400"

• Straightness Tolerance:+/- .003" (G3) & +/- .006" (G6)

• Weight Tolerance - 6-pack: +/- 1 grain

• Weight: Full-length bare shaft ~ 284 grains

• Profile: Continuous .001"/inch taper

• Internal Diameter: .204"

• External Diameter Point End @ 30.5": .275"

• External Diameter Nock End @ .5": .252"

• External Diameter Insert Tip: .330" 

• Material: Mitsubishi 3K Woven Micro-Carbon 

• Insert Weight: Approx. 70 grains

• Nock Weight: Approx. 7 grains
 
 

Copyright © 2024 GrizzlyStik. All rights reserved.