OVERKILL Samurai 150 Single Bevel Broadhead
Black Label vs Overkill Broadheads
The OVERKILL Samurai 150-grain single-bevel broadhead offers hunters the bone-splitting potential of a single-bevel broadhead while giving hunters the ability to shoot faster and flatter trajectories than the 200-grain. This broadhead, made from an AUS4 stainless steel blade, comes razor-sharp out of the package, ready for your next hunt.
Sold in packs of 3
The 150-grain Samurai has proven itself to be effective on all North American big game.
The 150-grain Samurai is perfect for bowhunters who are looking for that 575-grain to 585-grain 'sweet spot' which gives bowhunters the optimum balance of - a hard-hitting arrow and a good flat trajectory!
When you're running a 575-grain setup with a razor-sharp, cut-on-contact, single bevel broadhead like this OVERKILL Samurai 150 you are equipped for pass-through performance and bone-breaking potential.
GrizzlyStik Samurai single bevel broadheads, with their deep, razor-sharp single bevels and thick ultra-tuff blades split and blow through bone like only a GrizzlyStik single bevel can.
Even with lighter sub-650 grain set-ups, you're increasing your odds of blowing through bone when you're shooting our single bevel broadheads.
Our 150-grain Samurai single bevel broadheads are suitable for all North American big game and African plains game.
Set yourself up for success with GrizzlyStik Samurai broadheads.
When powered by the right arrow you will never have to worry about bone hits again. (For bone-breaking performance we recommend a minimum of 650 grains in total arrow/broadhead weight.)
Take advantage of the single bevel edge. Fill your quiver with Samurai-tipped GrizzlyStiks and hunt hard with confidence in your equipment.
GrizzlyStik Samurai is based on the straight-edged, high mechanical advantage broadheads, that were more efficient in all of Dr. Ashby's reports.
Right bevel only.
Note: Always match right bevel with right helical vanes/feathers.
|
➤ 150-grains
➤ 1.13" x 3.0"
➤ Blade thickness .069"
➤ AUS4 SS blade
➤ 54HRC
➤ Ferrule .334" OD
➤ 25° Bevel
➤ Standard 8 x 32 threads
➤ 3-pack
➤ Razor-sharp & ready to hunt
OverKill Samurai 150 Broadheads are a two-piece, straight-edged, high mechanical advantage blade broadheads, 1.13" x 3.00", stamped blades from AUS4 stainless steel. Our ferrules are made of 7075 anodized aluminum. Of course, they offer our signature bone-busting tanto tip. All edges, including the trailing edge, are honed razor-sharp at the factory.
Available in 200 grains.
Right bevel only.
Note: Always match right bevel with right helical vanes/feathers.
Click here to see all the Ashby broadhead penetration reports
Click to see our broadhead guarantee
Caution: Use only GrizzlyStik tapered carbon arrows with GrizzlyStik broadheads. Using parallel carbon arrows, especially thin-diameter carbon arrows using Easton's HIT inserts may result in arrow failure.